Apr 14  |  Shop buildout

Posted by , April 14th, 2010 at 9:02AM    

We’ve been working on moving Vanilla under the same roof as Coat (our paint shop) for about three weeks now. One big reason is so that I can be present with both businesses and both sets of employees. Process and efficiency is a big deal, especially when you get in to runs of bikes (Speedvagen) where instead of doing one thing slowly and kind of wading our way through it, we might be doing that same operation 30-40 times. Extra time on that one operation x 30 makes something that was once comically slow with one bike into a huge drag on the overall goal… getting bikes to their owners. This is the kind of thing that I never fully grasped until I started doing batches. Anyhow, this kind of thinking; looking at every little  step and breaking it down and refining it is something that  we are looking at daily and having everyone in the same place gives us a better connection which will make the whole situation more healthy.

the double door corridor from the frame shop (dirty) into the paint shop (clean)

Another (probably the most important) benefit of the remodel is finishing out a space for Coat. It  is all built out now and 98% finished with new benches, frame hooks, shelving etc. Most importantly all rooms are dry walled and sealed with caulking and glossy paint that’s easy to de-dust on a daily basis. The floors are sealed with an off white epoxy paint that is super bomber and is light enough to show dirt, dust bunnies, etc. The key to a paint shop is cleanliness and they’re now dressed for success.

this is the dirty prep bench. Sanding between coats of primer and color, pre-bead blast masking, etc. There are work areas for 3 people at this bench. The frames hang above this bench when their next step is at this bench.

Powder oven to the right. Misc. supply storage behind the oven

Powder oven. it’s 12 ft long, 10 ft wide and hangs out around 400 degrees. Um…That’s what she said?

entrance into graphics masking room

Still needs to be finished up with shelving and supplies. This room is where masks are applied after the base color is laid, and before graphics are sprayed on. This room is accessed directly from the paint room, so that a frame doesn’t have to go into the dirty prep area until after it gets the final clear and is cured.

Scott, Beans, Mike and I are still working on the front of the shop where Vanilla will reside. The build out is done, painting is done (except for some touch-up), I spent the day clearing stairs and leveling the plywood flooring in the office loft area so that I can paint it and it won’t look like I painted over shitty ply with a bunch of voids. Clean, sand, sweep, vacuum, putty (like mud for drywall), putty, putty, putty, repeat, repeat, repeat. It’s drying (well, it dried overnight). Will my wife notice if I disappear from the multiple Easter parties to go paint it?…

beans running conduit above the paint boot into the Vanilla space for our mills and lathe.

this is going to be our office and fitting space. A little of our sky blue in the mix.

Working on building out a shop reminds me that I am a professional framebuilder and I am proficient at that and that there is a reason that I pay people to do what they’re good at. Don’t get me wrong, it is interesting to learn to mud drywall, re-surface floors, etc. But there are people who are good and fast at those things and, well, that’s kind of what makes society great, right?

Regardless, we are close. We’ll be moving this week (which is a huge project in-and-of-itself) and I hope to be back in the swing of things next week.

5 Comments »

  1. Can’t wait to see it in person.

    Comment by crankles — April 14, 2010 @ 9:27 am    

  2. ps. that’s a hecka nice paint cap your daughter is wearing..hey wait aminute, there’s no paint on that roller!

    Comment by crankles — April 14, 2010 @ 9:29 am    

  3. ^^^^^ or maybe it’s pink paint?

    Nice, so are both vanilla and coat moving to new premises or are yuo moving in with them? Looks like you are doing a good job though.

    “Process and efficiency is a big deal, especially when you get in to runs of bikes (Speedvagen) where instead of doing one thing slowly and kind of wading our way through it, we might be doing that same operation 30-40 times. Extra time on that one operation x 30 makes something that was once comically slow with one bike into a huge drag on the overall goal… getting bikes to their owners”

    OK ‘Henry’ so long as we can have it in a colour other than black, not that there is anything wrong with black, but other colours are available :)

    Comment by chris — April 15, 2010 @ 3:34 am    

  4. So many things about Vanilla/Speedvagen/Coat leave me with this positive impression of being well thought out and precise, planned with vision, attentiveness and responsibility. So does this. I really dig this approach, it points forward and again leaves me impressed.

    All the best in the new shop, Sacha & Co.! Keep up those vibes and people will get it.

    Comment by g. — April 16, 2010 @ 6:17 am    

  5. …thinking like Henry Ford….

    Comment by bob — May 2, 2010 @ 6:19 pm    

RSS feed for comments on this post.      TrackBack URL

Leave a comment